2001 KTM SX 125 "shock" Questions

...have to take the sub frame off the back which is about 4 bolts on most youll have 2 nuts above the shock the top one is just a lock nut back it off then raise the lower nut do not tighten it down on ...

Lowering seat height you can lower the seat height by adjusting the rear shock preload decreased the pre load and it will lower the seat height atleast by an inch or two...

ktm 125 sx lower shock absorber bearing number ? It's a special made joint and not actually a regular bearing, so you won't be able to find a traditional bearing number. KTM or the mc aftermarket is ...

...realy work good.. Put it up on your stand lossen the axel and remove the bolt on the bottom of the shock. Then tighten your chain and lift your swingarm up until its horizontal with the ground, then ...

how to replace shock absorber on a 1200 Sportster 2007 Simply remove the nut from the top stud and the bolt at the bottom and remove the shock absorber. Now, if you're talking about replace the shock ...

my 2006 streetglide shocks keep looseing air my 2006 streetglide shocks keeps looseing air pressure. Are there better shocks available or can this be fixed These shocks have weaker gaskets in them, ...

I have an 82 gl1100I with aslow leak in air shocks should I just replace them or try new orings? It really depends on the condition of the shocks. Replacing the shocks with new ones is pretty ...

kx250 rear shock is out of oil how do i add oil to it If the bike is real bouncy with no dampining you need to have shock rebuilt you cant just add oil to fix.Most rear mono shocks have a little ...

I want to replace the rear shocks of my Kinetic Blaze but they are not available. So which bike shocks can I replace them with? Please suggest. Also comment whether it is possible to fit nitrox shock ...

pulsar 150 DTSi rear shock absorber gas pressure is low. How to fill the gas into shock absorber and how much pressure of gas to be fill into it?........ and normal AIR can fill into shock absorber...