NEC DTU 8-1 Corded Phone "forward button" Questions

...button. you can either dial the call forwarding manually by pressing the line you wish to forward dialing *72 then the number you wish to transfer to or you can re-program the one touch button by ...

...button to forward on Norstar (if do daily) Feature * 1 Press spare button Enter the * code, enter a few pasuses (Feature 78), enter the outside phone number. i.e *88PPPXXX-XXXX To program a canel ...

number. When done, press feature 00 to get out of programming. To activate, press the button you programmed the forwarding on., then the green light will come on. To un forward, press the button again

...button before hanging up thus setting 333 to call forward to their extension when they got off the phone. All phones on our system should have this feature turned off, but if it happens this is the ...

...button continues to flicker, then the call forward when busy is activated. It is de-activated the same way except you press # 12 instead of # 11. for future help with forwarding your calls I have ...

...going to use as a Forward button. Also you MUST have PERMISSION in your particular CLASS OF SERVICE for forwarding to an outside line. This MUST be programmed by your installeror it will never

...FORWARD/DND" button to change to the hour selection 6.-Press "TRANSFER" button and enter the hour 7.-Press "FORWARD/DND" button to change to the minutes parameter 8.-Press "TRANSFER" button and enter ...

...FORWARD/DND" button to change to the hour selection 6.- Press "TRANSFER" button and enter the hour 7.- Press "FORWARD/DND" button to change to the minutes parameter 8.- Press "TRANSFER" button and ...

button to place the call on hold and the caller will hear music on hold. Then dial the extension number and press # to transfer the call. --------------------------------------------------------------

...FORWARD/DND" button to change to the hour selection 6.- Press "TRANSFER" button and enter the hour 7.- Press "FORWARD/DND" button to change to the minutes parameter 8.- Press "TRANSFER" button and ...