...header pipes made from stainless but do they have to be identical to the original pies or can they be made to be straight through or will this affect the way the torque of the engine or can this be ...
torque Tighten the top nut of the front cylinder head exhaust ****** to 9-18 in-lbs (1-2 Nm), then tighten the bottom nut to 100-120 in-lbs (11.3-13.6 Nm), final tighten the top nut to 100-120 in-lbs
...exhaust change to change the torque characteristics of the motor. That's the whole reason for putting on a new exhaust (unless you just want to make more noise.) Have you examined dynamometer runs ...
...header out of the exhaust port. Use a torque wrench or they will leak. Now you have enough room to install the allen wrench into the fill plug. This plug is about 1 1/2 in diameter. It is a big pain ...
...header pipes made from stainless but do they have to be identical to the original pies or can they be made to be straight through or will this affect the way the torque of the engine or can this be ...
TORQUE SETTING EXHAUST HEADER BOLTS abour 16ft lb
...header should deliver more low end torque. Also do I have the S440 can info right, only 1 spark arrestor in the shorty?,The so-called S440 pipe did not have a separate midpipe. It had a fixed welded ...
...header pipes in place you can make sure they are seated properly before you sequentially torque them down. They will take 8 - 10 ft lbs of torque when you are finished. This is the most crucial part ...
...header pipes made from stainless but do they have to be identical to the original pies or can they be made to be straight through or will this affect the way the torque of the engine or can this be ...
5 questions posted
Usually answered in minutes!
8 Questions
5 Questions
5 Questions
5 Questions
5 Questions
