2005 Hyosung GT 250 "tank mounted carb" Questions

...mounted directly to tank....two fuel lines run from it,one to to carb/intake runner and one to what looks like a fuel pump? the fuel petcock diaphram might need to be repaled. or gasket that is from ...

...mounted? Check for cracked fuel hose or bad connections at the tank and carb. Is the fuel valve body leaking gas where it mounts to the tank? Heck, with the bike being 36 years old the tank may be ...

carb mounting rubbers New fuel filter Gas tank flushed Starts and idles beautifully. I was able to sync the carbs as well as adjust air mixture. The problem is when I give it gas, immediately bogs and

...tank. Is there any water or trash in the cup? Dump it, clean it and re-mount it, ( not all bikes have a water trap bowl ). Drain the carburetor. There should be a screw on the lower side of the carb ...

Cannot remove the carbs (Physically). Do I have to remove the fuel tank? Is there a special tool needed? I can get the carbs completely free but can't seem to remove them between the cylinder heads ...

...and im trying to remove the carbs what parts do i need to remove proir to removing the carbs fuel tank side covers loosen air box mount bolts throttle cables manifold clamps spray some lube to ...

...tank of fuel but none in the carb. Put the petcock in the "ON" position and fill the tank. Ride until your engine runs out of gas and not the miles it took to do this. This is how many miles you can ...

...This problem can be due to 1) clogged idle circuit in the carb. 2) ignition timing 3) Vacuum leak at carb to head mount. 4) restriction in tank port, or clogged screen in tank valve. Hope this

...mounted to the tank. The main fuel supply (larger port on tank) goes to the bottom fuel supply rail with the only carb port on that rail. The upper two ports between #1 & #2 carb and between #3 ...