clutch lever hey when I ride my left hand gets exhausted because the lever is hard is there any setting to make it softer? my dad put some wd40 on it and its a soft as a babys bottom now try it before
clutch quit working. I have adjusted the cable and am getting full range of motion, its just not dis engaging the clutch. it has 2000 miles and has not been ridden hard at all. I have taken the clutch
clutch not working i was just ridding my roadliner with 1,400 mi. when the clutch just stopped working the lever feels a bit soft. Check the clutch fluid in the clutch fluid reservoir near the clutch ...
...clutch is not working when I adjust it on the handle bars it slips Mechanical issue: clutch not disengaging completely... engine off - put in gear and roll back and forth with clutch released does ...
Question about Hyosung GT 125 Motorcycles
...Starts fine Idles fine, now that I adjusted that, and all lights and everything work. Moment I clutch in and shift it stalls out. Is it the clutch cable the clutch something electrical. This is ...
...working as it should be, you may have oil fouled clutch plates. Oil fouled plates would cause the bike to jump/lurch from a stop and could also stick together. It is a dry clutch on your bike, no oil ...
clutch not working! I also have a 1987 yz125. when the bike is in gear and i pull the clutch in it doesnot put bike in N. i can see the cable moving when i pull the clutch but does not put it in N. so
clutch not working the clutch on my rm 125 does not work if the bike is in gear and i pull the clutch in it does nothing ive tried just pushing the clutch arm all the way in and that dont work either ...
Question about Motorcycles
Thought my clutch was worn out....but after adjusting the cable, its not dragging itself. Need some explanation. Hi, Teddy when your clutch wears out it will start to slip if you have excessive free ...
...clutch was working great i put it away then a few days later i went to pull it out and i pulled the clutch and went to walk it outta the shed and it didnt move its like the bike was still in gear any ...
23 questions posted
Usually answered in minutes!
