1984 Honda GL 1200 Aspencade Gold Wing "drill" Questions

I,m getting ready to mount luggage rack and saddle bag rack. what is the best way to drill the holes for mounting these racks,without cracking the paint or fiberglass? start with the smallest drill ...

...Intruder LC, to be just a little louder? I do like the look of the stock exhaust. Yes, Buy a long drill bit and drill holes in rear baffels, I used 3/8 and started with 3 in each then drilled more ...

drilling a 2008 aprilia rs125 cdi unit hi does anybody know the procedure to drill my 2008 aprillia rs125 cdi unit i have fitted the power valve but doesent seem to be working i have read that ...

how to remove baffles Step 1 - Remove Exhaust Remove the whole exhaust from the bike. Step 2 - Drill Out the Baffle With a ½" hole saw and a handheld drill, insert them into a hole in the exhaust's ...

...been told my jet in my 50cc is 96 jet so does that mean I need to put in a 98 jet?. Use a numbered drill set, measure the jet size using the drill bit set, then select a drill bit two numbered sizes ...

how to tighten the depth adjustment lever on CMCS500 The CMCS500 is a Craftsman cordless drill that features an adjustable depth stop. To tighten the depth adjustment lever, follow these steps: Locate

what size easy out would you use to remove bolts in 500 foreman muffler baffle if its M8 thread drill first with a 5mm drill, then use what fits best, I have 2 different sets of easy outs but cant see

...the more it bites into it and helps turn it out. You may want to try this first before resorting to drilling out the bolt. If you have to resort to drilling the stripped bolt out, you will of course ...

...not sure how to install it..i know it is a simple thing...but any guidance? main thing befor you drill the mounting hole, make sure its in the middle and the right spot. i did many accurate mods

...clutch cover when in stripped out one of the screws. How do I fix this? A couple of ways. You can drill the screw head off, take out the rest of the screws, remove cover. Then, IF you didn't drill ...