1984 Honda CB 700 SC Nighthawk "set carb 160 motorcycle" Questions

...help. cheers lads! Too much fuel is getting through the carbs.  The carbs either need setting up properly or the correct size jets

...set floats to 21.4 - 23.4 mm (0.84-0.92 in.) If the float chamber gasket is still on the carb, reduce the measurement by approximately 1mm. As a side note, I went to an auto parts store to buy a ...

...sounds like bad gas or computer map setting loading fuel, bike carb or injected? quick fix try injection cleaner and better gas. Where do you get your gas, have ethanol  added to there

i need the specs for setting the floats and jets on a 1986 kawasaki gpz 1000 The float setting is 17mm frombase of carb to farthest edge of float ,holding carb  vertical

...carb kit set? V65 Magna!  You are going to love that bike if you get it together.Nothing wrong with cranking it around with the Starter to check for compression and such.Those are tough ...

160;If you are not sure you can do this that find a local motorcycle mechanic who can help you. to keep repair costs down you may want to bring them the set of carbs removed from your bike (if you are

...down been told is exhaustion of fuel replaced tank filter and carb top not worked problem is not all the time please help check that mixture screws are set the same and get the carbs

...carb and remove the plunger or yamaha calls it starter set and clean the inside where it attaches usually it will hve some oxidation deposits in there so it good time to clean the whole carb what i ...

...set for 4 years and it won't start. I cleaned the carb everything but the piolet screw because I didn't have the plug. After putting it back together it starts fine when you chock it ...

...then you need to check your fuel system.1. check to see if your fuel petcock is not flowing and the setting is on on or reserve. If it is still flowing then the vacuum diaphram needs ...