Question about Honda VT 500 C Shadow Motorcycles
84 honda shadow vt700 clutch slips when hot I have a 84 honda shadow vt700 clutch works fine when cold but when it gets warmed up the clutchs slip so bad it wont pull itself. Ive bled the master ...
Clutch Dose it have a wet clutch or dry ? wet clutch is when the engine cover is sealed on the motor with oil in it a dry clutch is outside the crank cases and you can useally see it and hear it ...
Question about Honda VT 500 C Shadow Motorcycles
After a few unsuccessful minutes of trying to start my Shadow (It's cool out, late October) the clutch seemed to stop working. It's now harder to squeeze than normal, and when pulled in, the bike ...
Question about Honda VT 500 C Shadow Motorcycles
I'm having trouble with my clutch. The clutch does not engage when I pull the handle. I took the cover off the clutch and there was no rust. I also checked the fluid level and it was full. Did anyone ...
Question about Honda VT 500 C Shadow Motorcycles
i have a Honda 1984 Shadow VT500C,when i press the clutch lever i can here knock or noise in a place where clutch is on the right side and when i let go of the clutch lever it goes away,can anyone ...
1985 Dose it have a wet clutch or dry ? wet clutch ! is it slipping ? if yes then do you have a cable or hydrolic lever ? cable you can adjust off more free play and if it still slips then replace the
Question about Honda VT 500 C Shadow Motorcycles
how do i adjust the clutch on my shadow vt700. when taking off in first gear bike acted as if i were taking off in second gear.. there is 2 spots you can adjust your clutch. 1. on your clutch leaver ...
Question about Honda VT 500 C Shadow Motorcycles
gear. It seemed to shift good but it just wouldn't go anywhere. Put it in first and release the clutch and it would just barely creep along. What could this be? clutch not fully engaging check for
The clutch will not disengage, can anyone out there help-thank you If it has been sitting for a while, the clutch plates are rusted to the friction plates. Get ready to remove the exhaust, drain the ...
not clutching the clutch is not engaging ADJUSTMENT FAULTY,CABLE STICKING,
225 questions posted
Usually answered in minutes!
151 Questions
92 Questions
3 Questions