1983 Honda vt 500 ft ascot "remove rear swing arm" Questions

Ad

Question about Harley Davidson Motorcycles

1 Answer

...off ground. Loosen chain adjusters, loosen and remove axle nut and remove axle. Remove chain from rear sprocket. Remove bolt from lower shock mounts. Loosen nut on swing arm and remove swing arm

Ad

Question about Honda vt 500 ft ascot Motorcycles

1 Answer

...and after 100miles check the belt tension if so adjust it and also you will require a torque wrench to torque the bolts on swing n arm and on rear wheel the wheel is 100 NM and swing n arm is 79 NM ...

Ad

How do I remove the left rear sprocket so I can remove the swing arm? Hi Dan ,what make and model is your bike and do you want the rear sprocket off or the swinging arm.

...rear swing arm Question edited for clarity. Question moved to one of the 8 Honda Shadow categories. Honda OE part number 07908-4690003 and is used on the Honda OE lock nut number 90355-469-000 There ...

Question about Honda vt 500 ft ascot Motorcycles

1 Answer

...Remove the rear wheel and the rear shocks. Look for anything else that may be attached to the swing arm such a brake rod return springs etc. Once you have everthing off the swing arm, take the pivot ...

Question about Honda vt 500 ft ascot Motorcycles

1 Answer

...remove the rear wheel assembly completely, not forgetting to disconnect the torque arm and brake cable / rod if your bike has drum brakes. Remove the drive pulley cover and ease the belt off. Now the ...

...remove rear end. Undo top bolt or you might get away w/bottom for shock - next two pivot shaft nuts - big socket like, Allen head in middle - remove nut from pivot shaft (left and right side where ...

Question about Honda vt 500 ft ascot Motorcycles

1 Answer

...remove rear wheel, release the rear brake hose , undo clamps holding shock tank, remove upper shock mounting bolt, remove bolt holding double connecting rod to chassis, remove ring nut and fork pin ...

Question about Harley Davidson Motorcycles

1 Answer

...rear wheel is in position to remove it . take off your chain/belt. remove brake caliper ancers axel rear wheel diconnect shocks chain guars bla..bla..bla.. bend lock tabs on lock washer back remove ...

Question about Honda vt 500 ft ascot Motorcycles

1 Answer

...remove the rear brake linkage from the rear drum. remove the axle nut and slide out axle shaft from axle housing. Be careful to notice the position of the spacer and washers. the installation is the ...

Not finding what you are looking for?
1983 Honda vt 500 ft ascot Logo

47 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...