...cam chain tension. Start the bike. Warm it up and while idleing loosen both off NO MORE than TWO turns. Tighten them back up and there is your chain tension done. If it slips u prob need a new cam ...
...cam chain will now come off the lower wheel, and can be pulled up and out over the end of the camshaft, and replacment would be in reverse order, checking alignment of all previously noted marks and ...
Question about Honda XL 125 R Motorcycles
...cam chain recieve tension from the 3mm bolt in the top of the crankcase or is there a spring or something behind the flywheel the only thing you can do is take it all apart there is no simpler way :( ...
...cam sprocket When this occurs, the timing chain has stretched to the point where you'll never get the valve timing exactly right. I'd replace the chain, they're cheap enough (about 25 ...
cam sprocket over the chain and locate the mark on the sprocket upermost to align with the cut out on the rocker cover, you may. Then have to flick the cain over the sprocket using a screwdriver until
Question about Honda XL 125 R Motorcycles
cam chain.if you remove the small bolt in the top of the tensioner lock nut there is a 3mm thread in the adjuster rod.get your self a long 3mm screw or possibly a spoke (i use a tail lamp screw)thread
...chain when you align the marks like when the tensioner will after you put it on.Use a screwdriver through the tensioner's hole. When you are done the marks on the cam and the flywheel should align ...
...chain that I have to check or is there something else? It fires and backfires in the carb. Thanks Marc if it create backfire the timing is not set properly, put the timing mark T of the flywheel to ...
Question about Honda Motorcycles
...cam chain is worn/stretched, it needs to be replaced. Here is a direct quote from the manual: "Measure the amount of the cam chain tensioner projects as shown (there is an illustration). Replace the ...
...Cam chain tensioners pretty sure its the cam chain tensioner springs. lost their spring If its been making this noise for a while what else would i need to replace. cam chain? tensioner springs? cam ...
105 questions posted
Usually answered in minutes!
