1982 Honda CX 500 B "pressure" Questions

Ad

Question about Honda CX 500 B Motorcycles

2 Answers

Honda front strut air pressure what is the air pressure for the Front Air/Oil struts on a 1982 Honda CX 500C? fork psi should'nt exceed 9psi. fork air valves are best used for removing air. spring ...

Ad

Question about Honda CX 500 B Motorcycles

1 Answer

my 1980 honda cx500 brake lever gives no pressure for the first 75% and a weak grip after that. how do I fix it? It sounds as if there is air in the brake line. Bleed the brake line.

Ad

Question about Honda CX 500 B Motorcycles

1 Answer

... The fork details are the same as the CX500B and is 210ml (or cc) of fork oil and 11psi maximum air pressure. Try 10W fork oil for slightly better damping (these bikes are getting older and the fork ...

Question about Honda CX 500 B Motorcycles

1 Answer

...to it, when tightening the rocker coverbolts when you feel them stop use only a slight amount of pressure to tighten, as they tend to break when overtightened, i am not sure what part you refere

Question about Honda CX 500 B Motorcycles

1 Answer

...leaking valve or worn piston rings) is as follows with an oil can squirt 2 or 3 times into the low pressure cylinder after noting the dry compression reading with no oil, if the compression reading ...

ENGINE AT 1800 RPM AND HYDRAULIC PRESSURE AT 400 PSI.WHAT SHOULD THE PRESSURE BE AT THAT RPM NOT MOVING ANY OF THE CONTROLS. pressure is generated by restriction of the flow of the oil--no restriction

Question about Honda CX 500 B Motorcycles

1 Answer

easiest or best way to add an oil pressure gauge to an 88 harley 883 sportster.. to add an oil pressure gauge, you'll need to put the pressure pickup tube at the same place where the oil pressure ...

Question about Motorcycles

1 Answer

Tyre Pressure The reccommended tire pressure for the bike (any vehicle) is in the owner's manual. The pressures on the tire sidewall are the minimum and maximum pressures for the tire itself. Loading ...

How to put a oil pressure gauge on my 86 Yamaha radian to make sure its getting adequate oil pressure and what would the oil pressure spec be also where is the oil pressure relief valve if it has one ...

Question about Honda CX 500 B Motorcycles

1 Answer

...engine started "to make more noise". You engine is equipped with hydraulic tappets. If you lost oil pressure, the tappets would have sounded like rocks in a tin can. If you think you have an oil ...

Not finding what you are looking for?
1982 Honda CX 500 B Logo

50 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...