1981 Honda GL 1100 Innerstate Gold Wing "starter" Questions

why is there oil coming out of my starter on my 1983 honda goldwing 1100 The oil seal on the end of the starter is leaking or the o-ring between the starter and the case is torn. If there is oil in ...

when starting the bike the starter motor makes a humming noise and will not turn over the engine. I would like to know if there is anything other then changing the starter. I am going to try to short ...

1982 goldwing 1100 when ir runs it sounds like a chain is running i the starter area .does the starter run on a chain and if so is the an adjustment if it sound this way, the starter bendix is staying

The starter is stuck just clicks what is the easy way to free the gear Firstly ensure that the battery is adequately charged. If so, and the starter clicks, odds are you need a new starter, you can ...

Bad Starter? Started up fine when cold, but with a bit of hesitation when intiatially pushing starter button. After normal driving for 7 miles and shutting down for 5 minutes, it would struggle to ...

...I have had this problem after storing my bike for the winter. I have replaced the battery,had the starter, checked and gotten a new cylinder and the oly way it will start is to boost it,the switch ...

why does the starter drags on my gl 1100? the battery is freshly charged, as well as brand new, so that isn't the problem. i have just replaced the starter clutch once more. the way that it ...

my manual says i have to pull the engine to remove the starter in a 1981 honda goldwing 1100 is there an easier way to do it The starter spline plugs into a gear that attaches to the starter gear with

I drove to work on my 83 goldwing. At lunch drove without incident. At knockoff, the starter would turn but not engage. Any ideas? Assuming the starter chain has not broken your one way clutch inside ...

starter will not turn over Starter for my 1980 gl1100 goldwing will not turn over. All I hear is a click from the start solenoid. Battery appears to be good voltage above 12v. How can I test to be ...