1976 Honda GL 1000 (K1) "points" Questions

...dirty contacts or are shorting out. Honda sold a tune up kit that came with plugs, condenser, and points mounted on a new plate. If that is no longer available you may still be able to order in the ...

I have a 1975 Honda GL1000 standard. I replaced the points and adjusted them. When I went to start it w/the push button starter it just made a buzzing sound. I then was able to kick start it and it ...

1975 wing just got runs ruff idles but the #1and#2 are in back of motor not front when i switch them like my other75 wing just back fires and dont reve like the other one reves slow #1and#2 are in ...

...with #1and2 in back of motor i switch around like the other one dont run are coils backwards or points starts cold blooded when warm idles fine but reves up slow out of time maybe 1and2 in back

...makes a coil that will bolt in directly. The coil to buy is dictated by whether you are still using points or have switched to an electronic ignition(highly recommended) available from Parts ...

mountin carbs back on bike need diagram 2 see how it goes on 79 honda goldwing 1000 Not sure if this is what you want. If the carb rack is fully built up: 1) remove the air cutoff valve from behind ...

...set timing on honda gl 1000 motorcycle the manual says when marks are in line the breaker cam dot points at left set of points mine points to the right set any suggestions thanks u probly dont hav ...

Point setting for 1975 Honda gl goldwing 1000 Settings for your points are (0.012 to 0.016 in) Have a good day. D.

...end of the wire is stripped clip 1/4 inch off the end of the wire and screw the new cap on. If the points are giving you trouble, the points and condenser can be replaced with a compact electronic ...