Question about Honda GL 1000 (K1 Motorcycles
...into the cylinder head ports!! Use some Vaseline on them if necessary to stick them in place (NOT GREASE!) 5) attach the choke cable and the fuel line to the fuel pump. 6) go over everything and ...
Question about Honda GL 1000 (K1 Motorcycles
...grease any moving part, drain fuel, pull clutch lever in and keep pulled in with a rubber band, spray a small amount wd40 into carb, as fuel dries it blocks jets ,cover with a old blanket not plastic ...
Question about Honda GL 1000 (K1 Motorcycles
...band. A small dab of grease will hold the washer in position while you reassemble the needle into the slide. The purpose of the washer is to RAISE the needle about 0.020" thereby richening the ...
Question about Honda GL 1000 (K1 Motorcycles
...grease a drop of 20-50 is fine. Anywhere else in the world, we put voltage on to the field terminal to produce current at the armature, trust the Americans to be different! Ride safe and loud pipes ...
51 questions posted
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions