1972 Honda CB 350 F0 "starter wiring" Questions

...and two activator wires ( you may have to change the plug ends). OEM part # was 30580-306-670 starter magnetic switch ...

...battery terminal then use bulb 12V DC connected to the wires and start your engine ( use kick starter) and see how your bulb work. If your bulb dimmed at a your average or high rpm then your ...

...starter wireing The wiring is simple for a starter. You have a starter solenoid on the bike and a starter relay. When you press the button to start your bike, the button has a wire that runs to the ...

1995 yamaha moto 4 starter relay wireing how does it wire up I have main per wire going to starter neg wire grounded to engine block asmall gauge red and wire wire a larger gauge red and wire wire and

wiring. any help would be great. Maybe a bad solenoid in the starter. Check that you have a good ground to the starter. would suggest running wire from the battery negative post to the starter housing

...starter button, probe should light up (ign on), if it doesnt, chase the wiring up to the switch. If it does light up, take a jumper wire and cross the two larger wires and see if the starter engages ...

Honda CB360 STARTER WON'T TURN??? Hi, I have a honda cb360 starter, took it apart and cleaned it. Everything is back in order, but it seams as if the wires are crossed so when i but put the positive ...

...the clickin sound is coming from under the seat next to the fuses. Please help It sounds like the starter relay is making the noise. Here's check you can make. Look at the starter from the right ...

where green wire on starter goes on 1997evo to make the starter button work and what you have to do to fix The green wire goes directly to the starter. When you look at the end of the starter, you see

...engine is not seized and the battery is charged and good. Unplug the two small wires going to the starter solenoid and push the starter button . With a voltage meter on the wires from the harness ...