...shape. Sometimes these would either weld together or get corroded. You may be able to run a bit of sandpaper between them if that is the case. If your points are OK, and your battery is charged, you ...
...the other moving parts. Also a good idea to give the inside of the hub a few spins with a peice of sandpaper. And if possible, snaps some pics with a digital camara, its easier to look at a picture, ...
Question about Honda CB 250 Motorcycles
...I use a drop or 2 of dish soap in a water spray bottle to prevent ball up on the 600 grit sandpaper. Don't press too hard, let the sandpaper do the
...t want at speed. it can also be brake pads singing against a smooth rotor. you can try taking rough sandpaper and lay it upright on a smooth surface. while wearing gloves the whole time, take off the ...
...the clutch and follow removal procedure. Obtain a couple of sheets of #400 grit wet-or-dry (black) sandpaper. Carefully disassemble the clutch noting the order of the parts. Lay the sandpaper on a ...
horn button dont work Hi, open switch and clean contacts (use a very fine sandpaper and some cleaning spray) Good luck
1995 kawasaki wont start has clicking sound and wont start you check battery terminals tighten it if its loose or clean it with sandpaper i mean your battery terminals together with the cables
i am getting a grinding noise fron my front wheel like a sandpaper sound is it the brakes? any thoughts on this? seems that the disc pads are rubbing continuously against the disc plate. Check the ...
...Where to now? Check the starter button it may be full of carbon, remove it and clean wth a 400 sandpaper or better replace it. Hope this ...
...them and ensure there are no nicks in the tubes - that's sometimes saved with very fine grit sandpaper to polish out the
82 questions posted
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions