2000 Ducati 996 Bi~ - Monoposto - SPS "oil plug seal ring" Questions

oil deposits in the verticle spark plug. My guess is the rings or seals are gone. 2 questions: How big of a major problem is this? can it be fixed at home?. Thanks all in advance. Ronnie did it happen

...oil seals. Check your spark plug see if they are fouled badly (covered heavily and oily) or just covered by oil and sooth lightly. If 5-10 sec it is normal as the engine is heating up there are ...

...Oil in the cylinders mean worn rings or worn valve stem seals. You can try a blow down test to see if it is rings - get an old spark plug and bust out the ceramic weld in a fitting to press with air ...

...plug and comes out black with oil then it could be a vave seal or it could be a damaged oil ring on your piston ,if it is doing it on all cylinders then more than likely the piston and rings need ...

...seal leak. The gear oil is separated from the crankcase by a seal to keep the gear oil and the 2-cycle gas-oil mixture separated. If the seal is leaking then the gear oil is entering the combustion ...

What are different types of oil drain plugs on Harley FatBoy There are three, engine oil, transmission oil and primary oil, all are 5/8 inch hex plugs and use o-rings to seal.

...plug out of the bottom of the slider and work the slider up and down to blow out all the oil. Then, remove the front wheel. Remove the top cap from the upper tube and loosen the top plug. Now, with ...

...oil plug. Make sure you properly ID the oil plug, there are two under there, one is oil, other is trans. Don't overfill oil. Don't over-tighten oil plug on re-installation, the aluminum threads are ...

...oil to get to the spark plug. Bad head gasket, bad rings on the piston, Cylinder scored or warped, and bad valve seals. Start with the most likely, bad head gasket. When they rebuilt the engine they ...

oil in? Yes it can. Does the spark plug look wet and oily, or does it look black and sooty? Wet and oily can be from a worn or broken oil scraper ring, or from bad seals on the valve stem. Also if not