...in common is the ignition switch. With the switch 'on', check for battery voltage at the fuses for the headlight, turn signals, horn, etc. No voltage at the fuses likely means a bad ignition
Question about Motorcycles
...bad ground. Is it possible ignition switch could have carbon build up or a small bug dead on contacts? That happens on home A/C units a lot. If not? What? Help! If you think it might be the switch, ...
...do not work if you wiggle ignition switch it will come on but go off as soon as you hit brake or try to use turn signals LOOSE WIRE BAD RELAY FUSE WIRE TERMINAL MALE TO FEMALE END NOT TOUCHING
Question about Husqvarna Motorcycles
...between starter and battery . The starter switch must provide the signal to the solinoid. If the Starter switch or ignition switch are not getting "juice" look for bad connections and or a fuse
...ignition switch on, you should have voltage to one of the two connectors. In not, you have an electrical wiring problem. If you do and the light is not coming on when you press on the rear brake, ...
Question about Aprilia Classic 125 Motorcycles
...ignition switch turned on check for power to the turn signal switch by touching the solder connection or stabing the orange wire with the white stripe, if it lights good if not the problem is between ...
Question about Aprilia Classic 125 Motorcycles
...stopped working as well. The fuses are fine and all wiring seems to be OK. What is the part that needs to be replaced? IF EVERYTHING ELSE IS OK, SOUNDS LIKE YOUR IGNITION SWITCH COULD BE GOING
...ignition on only the left side flashes, so I thought maybe its fuses. I checked fuses they are all good. Then I hit the left turn signal on works fine, with the left turn signal on still then I hit ...
bad. Look on the chrome cover on top of the transmission and you'll see a wire that plugs onto the neutral switch. Disconnect this wire and ground it to the engine. Turn on the ignition switch and
6 questions posted
Usually answered in minutes!
6 Questions
2 Questions