Question about Aprilia RS 125 Extrema Motorcycles
...and breaks it so get a new cable new pressure plate and adjust properly i adjust it be screwing till i feel the resistance then back of 1/4 turn to 1/2 turn i hope this helps thanks heaps
...collapse the fork and slide it apart fast and with some gusto this will knock the seal out repeat till its apart. once it's apart you'll see the seal and bushing. remove both bushings be easy ...
Question about Loncin Motorcycles
...farmer modelstruggles to start but when it does it runs ok but if I switch it off hot wont start till goes cool again any ideas Check the spark first. It should jump a 1/4" gap minimum. It is best ...
...piece non-collapseable stand). Pull out the cotter pin, loosen the axle bolt, turn both adjusters till you have the correct amount of slack and they are both set to the same number. Tighten the
36 questions posted
Usually answered in minutes!
23 Questions
3 Questions
10 Questions
3 Questions
2 Questions