2007 Enfield Bullet Electra "gear shift lever tight" Questions

gear shift shaft and the toe of the lever does not touch the engine sidecover when changing up, you may have a worn roller shift lever or loose screws holding this mechanism in place. See the exploded

...shift the transmission from first to fifth gear without the engine running. Rock the bike forward and backwards while trying to shif the gears. If you can go all the way up and back down, the ...

...shift? Grabbing and stalling as it selects the gear? Start at the clutch lever. Check it is pulling the cable then check at the transmission end that the cable is connected and moving with the lever. ...

...is that I can shift into first gear then second, but no other gears Dear, please get your gearbox checked might be the gears have worned out or the lever is not connected tightly to the gearbox ...

...gear lever is tight on its shaft! you my be able to rock bike back and forth without using the clutch, while shifting the lever at the same time the selctor mechanism inside the cover may be worn or ...

...if its hard to shift in and out of gear while running. there should be two adjustments, a top lever adjuster, and a bottom lever adjuster. always adjust the clutch componets fron bottom to

...shift to a gear. You should feel spring tension against the movement and it should return to "center" when you let go. If not, the shifter pawl return spring is broken. Usually when this happens, all ...

...shift drum in proper position for each gear. The stopper screw could have a broken end. The torsion spring may not be hooked in position. It could also be that the shift lever needs to be removed and ...

...shift lever, the pinch bolt may be loose, or more likely, the splines have worn out on the shifter due to a loose bolt. To fix, grab a 10mm wrench and loosen and remove the pass-through bolt that is ...

...selector within the gear box.If itseems tight to shift even when the vechicle is in motion an overalling will be necessary.Make sure the shaft of the gear lever to the gear box is does not have