Question about Enfield Bullet Electra Motorcycles
REAR BRAKE DISC HAS 8 VIBRATION BUSHINGS THAT ARE LOUSE. Hello Dale, this is an easy job on your bike. Use a flat head screw driver and remove the brake pad cover...it will pop off. Remove the hairpin
Question about Enfield Bullet Electra Motorcycles
...rear brakes have squeaked ever since I've had it. The service center said it could be dust but I don't know how to get the dust out. Any suggestions? hi buddy dust wouldnt cause this problem change ...
Question about Enfield Bullet Electra Motorcycles
...rear brake pads on 05 Suzuki Boulevard S83 and after pumping the brake pedal I still have no pressure in the lines to engage the brakes? Bleed the brake system, or have someone familiar with simple ...
Question about Enfield Bullet Electra Motorcycles
...rear brakes. the pads are good and theres plenty of fluide. ive tryed bleeding them and the pads still will not engage When you bleed brakes make sure bleed nipple is pointing downwards and the whole ...
rear brake caliper suzuki burgman an400 can anyone tell me if the rear brake caliper pistons push back to install pads or are they on a cam system?is there any problems regarding the handbrake when ...
...rear brake there is a very loud squeeky noise coming from it. its pretty embarrassing when i come to a stop and everyone looks over at where this loud noise is coming from. the bike only has 1200 ...
Question about Enfield Bullet Electra Motorcycles
...my brake pads are fine and plenty of brake fluid... so what could it be someone said it could be a rear seal?? more likely to need the brake bleeding up...try that befor pulling brake caliper in ...
Question about Enfield Bullet Electra Motorcycles
...caliper off to change there rear brake pads on my suzuki dr350se. i will assume the pads are tight against the disc?, release the pressure by undoing the bleed screw, don,t forget rebleed the
Question about Enfield Bullet Electra Motorcycles
...brake pads on a 1991 dr350 You didn't specify front or rear so I will hit both. Start with the front. Refer to this diagram: http://216.37.204.203/Suzuki_OEM/SuzukiDB.asp?Type=13&A=91&B=43 ...
rear brakes sticking push back the pads if possible and then press the brake and see if they return ! if not then remove the pads and clean where they fit and press the brake a little so the pistons ...
2 questions posted
Usually answered in minutes!
9 Questions
8 Questions
2 Questions
2 Questions