2007 Bimota DB5 Mille "bike jumps forward starting gear" Questions

Ad

Question about Bimota DB5 Mille Motorcycles

1 Answer

jumps forward and stalls or wants to move forward but doesn't quite stall. After the bike warms up the problem goes away. I am pretty familiar with clutches in cars and in general (I'm a mechanic) but

Ad

Question about Bimota DB5 Mille Motorcycles

2 Answers

...bike jumps forward when starting the engine Clutch discs are stuck, put the bike in gear, not running, pull in the clutch and push the bike back and forth to break the clutches loose. Once they break ...

Ad

Question about Bimota DB5 Mille Motorcycles

1 Answer

bike jumps forward and stalls See if you can push the bike with it in gear and the clutch lever pulled in. If the clutch is stuck, push start the bike, jump on, get to about 10 mph, pull in the clutch

Question about Yamaha Motorcycles

1 Answer

...bike jerks forward and cuts out. Not a prop stand problem. Bike was running great before, but started struggling to go into neutral and would jump into 2nd. had new clutch and correct oil put in. Any ...

Question about Bimota DB5 Mille Motorcycles

3 Answers

...bike shouldent start in gear with the lever out it would jump forward when you hit the start button.. there is nothing wrong with the bike by what you say its just a neutral light, witch is a switch ...

Question about Bimota DB5 Mille Motorcycles

2 Answers

...be dry for just a moment where they were bound together.. If you feel the bike jump forward when you put it in gear it may be your clutch going bad on you. other that that you may have a fuel

Question about Bimota DB5 Mille Motorcycles

2 Answers

...bike slowly move's forward have a look at the clutch cable there may be far to much slack on it so your not fully disengaging the clutch thats why the bike pulls forwards My bike does the same I'm ...

Question about Bimota DB5 Mille Motorcycles

2 Answers

...bike stops without any jumping forward just stops like a safety feature cutting the engine some of these bikes have a safety switch on the side stand, did you check that? most bikes have a neutral ...

Question about Bimota DB5 Mille Motorcycles

1 Answer

forward. There could be two reasons its doing this. Has the bike stood for a while before you bought it? If so the clutch plates can get a little 'sticky'. This is easily sorted by removing the clutch

Question about Bimota DB5 Mille Motorcycles

1 Answer

...stays on when in gear, if I press starter starting motor turns and bike jumps forward. Was going to change switch but can only find, 1100 switch on Internet. Will it fit 650? Call Yamaha and ask

Not finding what you are looking for?
2007 Bimota DB5 Mille Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Bimota Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Bimota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...