Ingersoll Rand 3/4" Super Duty Extended Anvil Air Impact Wrench "impact wrench problems" Questions

impact wrench. It's a relatively simple mechanism, where maybe something is broken inside. If it were blowing air but the veins were stuck, I would say, lubricate it. But, if no air goes through it at

...impact wrench with a trigger that sticks in. Don"t know if it needs a spring in the trigger part or if there is another problem. Took it apart and cleaned it and oiled and put it back together ...

impact wrench and connected it to my big 11 cfs dual tank compressor - but it will not take the lug nuts off my GMC Yukon. Whats likely the problem? It needs to be taken apart and cleaned then lube it

...impact wrench wont engage to the socket. I have the same problem, brand new impact wrench, brand new impact sockets, but can't get a socket onto the gun. Leaned on it with all my weight, wiggled, ...

...impact wrench that is almost brand new, have had no problems with daily use until today when the trigger will not move. The IR231c is equipped with a throttle valve stem (item # 9) that is prone to ...

air opertes but locks up under load air gun operates, but locks up under load Sounds like you might have a problem with the hammer (clutch) mechanism, these types of impacts are direct drive there a ...

I have no problems in reverse but gun seems to stop when trying to tighten. Had the same problem with my 1st 2135ti Sounds as though you have broken or worn hammers. Try KCTool 715 445 7700. They can ...

...impact wrench keeps spinning with the trigger no longer feeling any resistance. I read that the o-ring for the air intake on my CH PL 150297 might be the problem. Where is it located and what size do ...

Wrench Problem What is the best way to use my air wrench? * Proper match between air compressor and tool ratings. * Correct fittings that match the tool and air hose. * Well-maintained air compressor ...

...Impact wrench. It does not have much power. It is about a year old. The power problem started soon. I have torn the motor down, and have found no scoring of the cylindar. And, there are no problems ...