...program 2) Set Time and Day/ Correct time and day are needed for programs to work. To start, notice on the screen - in the corners are little letters: MAN, MO, OFF. And to left of time is PM. Set the ...
...set just 1 program or 2 or 3 etc. Each program must have ON time You set program 1 ON Each program must have OFF time. You set program 1 OFF Each program must have a day or days of operation So you ...
program 1 Set hour minute day for ON time for program 1 Display shows OFF P #1 >>> this means you are setting OFF time for program 1 Set hour minute day for ON time for program 1 Each program
Question about Woods Hardware & Accessories
...set Program preview > Have your schedule ready to avoid conflicts in programming Manual says: >For each ON time, you set DAY HOUR and MIN >For each OFF time, you set DAY HOUR MIN > So ...
...set Program preview > First I suggest you write out your schedule to avoid conflicts in programming Manual says: >For each ON time, you set DAY HOUR and MIN >For each OFF time, you set DAY ...
program 1 Set OFF time for program 1 Then set ON time for program 2 Set OFF time for program 2 Most timers will not function if there is a conflict in programming > for example Program 1 says ON at
...set but program 2 is not set. No programming is set. Short circuit on lights.I suggest change battery and reset timer, then reprogram timer.Write out schedule beforehand to avoid conflicts and ...
Question about Orbit Hardware & Accessories
Set program B/2 start time at 11am. Them select the specific area/zone you want to run again will water the area a second time. Just remember to leave the other areas you don't want to water Set at 00
Question about Woods Hardware & Accessories
...set up to 20 on-off programs over 7 days Each program has ON time Day Hours and Minutes Each program has OFF time Days Hours and Minutes Press right-arrow > PROG 1 ON flashes Press SET > choice ...
set timer How to program Raindrip R673CT Download R673CT manual at raindrip Other models R683CP R672CT Raindrip drip water guide R673CT Install 2 AAA batteries to power display Set current time: Press
429 questions posted
Usually answered in minutes!
305 Questions
125 Questions
60 Questions