Question about Solar Hardware & Accessories
located at very bottom of timer door. To activate program (on first day), function switch is set to OFF position for 2 seconds, and then move function switch to AUTO mode, and programming cycle begins
...light) 4) The ST01C red wire is only used when wiring for 3-way. 5) When the red wire and blue wire are connected together, they reverse the timer program. When timer red and blue are disconnected, ...
Question about Intermatic Hardware & Accessories
...program.html#ST01C Blue wire must always connect to the Load (light) The red wire is designed to reverse the timer. Each time the timer-red wire comes in contact with the timer-blue wire, the timer ...
Question about Ace Hardware Hardware & Accessories
...light on and resume the program. 7. In the case of power failures, the control will still operate each day, once power is restored, defaulting to dusk to dawn until you re-program it. To re-program, ...
...program 1-7 has ON time and OFF time plus day of operation 2) T1034 programming steps are lengthy> click link for manual http://www.aubetech.com/manuel/2/TI034.pdf Timer must be wired for display ...
...program ON/OFF settings. 1. Move the control lever to the OFF-CLEAR position for about 20 seconds. The red indicator light will go off and any previous time settings will be cleared from memory. 1. ...
...light or several lights. There is not a second switch that controls same lights. The switch has 3 wires. Generally there are two insulated wires and a bare ground wire. Add a comment any time. Here's ...
Question about Zip Heaters Hardware & Accessories
...Digital Wall Switch Timer its a wall timer switch we have with our outdoor lights. We dont have the programming instructions. There is supposed to be a way to use your area code or zip code in it for ...
...Light Timer? N1505 timer manual: http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf N1506 is heavy duty outdoor timer with display screen. Plug timer in and display flashes C. Set current ...
...light will stay ON, indicating switch timer is in AUTOMATIC mode. 2) Or you can manually program times using instructions from page 1 of manual: ...
29 questions posted
Usually answered in minutes!
397 Questions
305 Questions
125 Questions
102 Questions