Question about Hardware & Accessories
manual CREDA FLASH PROGRAMMER 2S, I can programme the current time and the comfort / reduced mode, however when i set the slide switch to 'auto' all that is shown is 2 moons. According
Question about Intermatic Hardware & Accessories
...2) Try reprogramming timer To program the ST01C: http://waterheatertimer.org/ST01C-program.html 3) ST01C has 1 year warranty + troubleshooting steps in manual, implying short life expectancy. Similar ...
Question about Woods Hardware & Accessories
manual for woods 59028 programmable timer switch need to know how to change the time settings 1) Set current time: Press reset button to clear all programs , display should flash 12:00 AM Monday Press
...manual I can't find mine. I either have the TI032 Most in-wall timer manuals suggest re-setting timer to restore functionality. If re-set does not restore timer, then timer is probably bad. To ...
...manual mode. Everytime I push the button, the lights all come on for a nanosecond and then go out. I checked each bulb separately and they're all good. I tested the circuit breaker and it's ...
Question about Woods Hardware & Accessories
...2) Use mode button and change between AUTO & RND >> try manual override in each mode 3) Does timer turn lights on-and-off with program, or do they blink too? 4) Swap Black and Red wires 5) ...
Question about Intermatic Hardware & Accessories
...MANual mode. To reach SET UP, press MODE button until set-up displays. If MODE button does not work, then timer has a serious glitch. 1) If this is a timer that worked correctly before, and recently ...
Question about Intermatic Hardware & Accessories
...manual says last resort to revive non-working timer is RESET timer. This action will delete current day setting and all programming Hold down ON/OFF and use paper clip to push in reset button for 2 ...
...manual: http://waterheatertimer.org/Woods-timers-and-manuals.html 1) Wiring is not suspect since timer has been working. 2) When any timer has a problem, press RESET button to see if problem solves. ...
Question about Leviton Hardware & Accessories
flash. The timer you have purchased will not work for 3-way switching. We know this because the wires are color-coded. And you have 2 black wires. Good job providing that information so I can see what
29 questions posted
Usually answered in minutes!
397 Questions
305 Questions
125 Questions
102 Questions