Intermatic Inc. EJ500C Digital Wall Switch Timer - Self-Adjusting Feature "install timer light blue" Questions

...light, fan, motor) http://waterheatertimer.org/ST01C-program.html#EJ500-wire C) If this is older timer that stopped working, check your bulbs. Then check timer battery. Manual says if timer stops ...

...blue wire instead of connected to neutral. Timer has 4 wires: green for ground, black for hot, white for neutral, and red-or-blue wire for Load. Open following link for wiring instructions and ...

...light up display. If timer not wired correctly, then display will not light up. Here is correct wiring: a) Two wires from switch. b) Connect timer-blue wire to one of the switch wires. Choose either ...

...light comes on, timer wiring is correct. If light does not come on, then reverse blue and black wires. Other in-wall timers except Aube have red, black, white and green Green goes to bare ground Red ...

Install GE15313 with Blue Black Green wires connect to which Blacks ... Green is Ground The unit has three wires Blue, Black and Green (Ground). Which of the two black wires (were attached to the ...

...install new timer same wire-for-wire. Return bad timer to home depot in new package. This is GE's extended warranty plan, but do not mention warranty at return desk. 5) Intermatic and GE are fierce ...

...timer, put it on another Load, for example a light. 2) Also you can test your wires. Take wire nut off Black-black connection and test to bare ground >>> tester should light up. Next take ...

install this for our outdoor Christmas lights. The wall switch box has 1 black, 1 white, and 1 bare (ground). Where do I connect the red "timer" wire from the timer unit? When I connect both

...timer, also the Light blue backlight on the display comes ON but there are no numbers being displayed there, only the backlight, any ideas why this could be? thanks Reset timer, and see if that fixes ...

...blue wire should be B) Timer does not have battery and is Tork, GE, Intermatic, Woods, Utilitec, Westek and has red, black, white and green wires. Here's what to do: Green goes to ground Two switch ...