...put the staples in it won't slide shut. Pull out the part that loads the staples, turn the gun upside down, put the staples in the bottom of the gun and push the loader back in. It took me awhile to ...
inserting staples how to Put the staples in the staple gun before you put in the tool. http://www.arrowfastener.com/sites/default/files/T2025_manual.pdf
PUT THE STAPLES ON THE "ARM" THAT SLIDES OUT FROM THE BACK OF THE STAPLER, ADN WHEN i CLOSE IT, I CAN HEAR THE STAPLES MOVING BACK AND FORTH, THEREFORE I KNOW IT'S NOT LOADED RIGHT. IT WON'T SHOOT ANY
put the staples on the bar at the back and push them into the stapler. I own a Power Sot and the directions are very clear. Squeeze the clip at the back of the unit and pull the spring-loaded clip out
Question about Arrow Tools & Hardware - Others
...put some staples in. The staples are visible in the side window, but will not come out when I squueze the handle. I also cannot remove them the way they were inserted. Any suggestions? Patti from ...
Question about Staples Tools & Hardware - Others
...put in more staples! there are some staples in it now but they are jammed, so I thought I could figure out how to open it and find the problem. Well, I can't make it happen, can you help? This is how ...
Question about Staples Tools & Hardware - Others
red light stays on will not staple wont GO DOWN TO STAPLE WONT GO DOWN TO STAPLE METAL PIECE RUBS THE THING YOU PUT STAPLES IN return it for replacement
...and the staples are not going all the way in(flush) Any ideas? ArrowET2025HD The material you are putting staples into is too hard for this little staple gun. You will need a more powerful stapler, ...
Question about Staples Tools & Hardware - Others
put new staples in my Rapid 34 and some come out but in the beginning they dont. Why? Hi Anonymous, Have you bought the genuine RAPID branded staples for the 34 tool? If not that is the reason. There ...
103 questions posted
Usually answered in minutes!
3 Questions
3 Questions