Question about Carlon Home Products Electrical Supplies
Wired photo cell problem only 6 month old Make sure that the white goes to the neutral, black to the live and the red to the load (light bulb). Make sure that the bulb is not hitting the socket before
Wiring the fan and light control Is there a way to connect the fan and light control to without having to run a separate wire from the receptacle to the ceiling fan? You have to run a 3 wire cable to ...
engine dies after running for a little while, and wont start for a few min. whats wrong? make sure fuel filter is clean. also check spark when hot, can be coilproblem. make sure that the choke goes ...
Question about Emerson Fans Electrical Supplies
i have a sw102 fan/lt switch that don't light up or operate and it is wireless Make sure that there is power to the fan and that the fan and light are turned on. Also, make sure the battery in the ...
Armacost dimmer doesn't work Install was completed as instructed. The dimmer is in a two gang box with the other ceiling switch. The low voltage wire is in a separate chase. When all connected the
Question about Lamps Plus Electrical Supplies
the touch feature on a table lamp has stopped working; is it fixable? maybe you need to find a contact wire to the metal housing on the lamp. THis may be around were you insert the bulb but not sure. ...
Question about Leviton Electrical Supplies
...you hook up the switch test the switches on both sides. Make sure each one turns on and off if that makes sense. If the blue wires are on wrong one switch will only work if the other one is on. If ...
...color). The Maestro fits into a decora opening so you may also want to get a new wallplate (Lutron makes these in a screwless version: CW-1-XX where XX is the color). Hope this
Need to replace but how do I disconnect the wiring? make sure the power is off first. then you should just have some wire nut connections. just turn them counter clokwise and they should come off. it ...
Question about Cooper Wiring Devices Electrical Supplies
have a 2 gang 2 way switch,one of the lights controlled by this switch is really only one way,the other(landing)light is 2 way.I can not get the 2 way to operate correctly they control a bathroom ...
11 questions posted
Usually answered in minutes!
627 Questions
549 Questions
535 Questions
166 Questions
208 Questions