RCA 25414RE3 Corded Phone "wiring intercom system" Questions

Ad

Question about RCA Lands Phones

2 Answers

...intercom. I have a system with 3 distribution panels. I when I try to intercom between the phones that are farthest apart, the intercom light comes on, but hangs up after about 3 seconds. the total ...

Ad

Question about Lands Phones

2 Answers

...wiring system with no interuptions so they can find each other in the network. then to use the intercom system, all you have to do is press 1-16 on your speed dial to reach out to the desired ...

Ad

Question about RCA Lands Phones

1 Answer

intercom system to work. help please make sure your wiring that connects lines from dmarc into the unit is consistant. Line1 must be line1 on all phones, line2 must be line2 etc. After line appearance

Question about GE Lands Phones

6 Answers

...system.) The way to to it: make a special cable that connects your single incoming phone line to both L1 and L2 on the phone, tricking the phone into thinking both L1 and L2 are working. Then program ...

...intercom buttons not working, it shows we have 8 working lines. This is not a common problem. Take that phone to a processor and plug it into extension. If no longer seing a problem look into wiring. ...

...intercom buttons at the top. I bet the problem is that you used to have two phone lines and now you only have one line. You cannot program an extension into one of these phones unless both Line1 and ...

...intercom set up already all over the property. O.K. You have external paging already set up, so here's the quickest solution. Listen to the tones and see if it's acceptable. ...

Question about Panasonic Lands Phones

1 Answer

...intercom call and red is a call from an outside line. First try a new phone line cord and check if you have a bad cord. Do you have dial tone at other phones/jacks in the building? Unplug the ...

Question about Toshiba Lands Phones

1 Answer

...Intercom/DN, # 409 and hang up. That is the code to cancel a message waiting light. If random buttons are flashing you probable do not have the phone plugged into a system port. Try plugging the new ...

Question about Panasonic Lands Phones

1 Answer

wiring. Now, in programming you need to enable the Jack in 600 and make sure the 39x code on the intercom says unmerged. I don't remember which is which, but I'm guessing (50-50 chance) that 390 makes

Not finding what you are looking for?
Lands Phones Logo

71 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Lands Phones Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Cindy Wells

Level 3 Expert

6004 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a RCA Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...