some submersible pumps have a gray motor box to start the pump & some submersible pumps have the new style motor box built in and is not lighting proof. some 240vac are two wire and three! I would
I have a visible wiring breakage as the wires emerge from the pump. Is this something that can be DIY repaired? Or should I replace the entire unit? Little Giant Tools-Products - 5 Asp Submersible ...
to motor frame. The wires from the motor should have been designed to carry the power load. Heavier wiring is always an option, to a point. Regards, --W/D-
...to 115v? I purchased a Red Lion 3/4 hp convertible ground water pump but must change the power and wiring from the pumps default 230v to 115v. I believe I changed the black plug properly but have no ...
WIREING DIAGRAM FOR FP40122-10 IIO HOOK UP 3 WIRES WHITE/NEUTRAL BLACK/HOT CORRER WIRE/GROUND WERE DO WIRES GO ON PRESSURE SWITCH. APEARANTLY THE PERSON WHO WROTE THE ISTRUCTIONS IS A 300LB FAT DESK ...
The pump is a three wire single phase. My inputs are two 110 voltlines out of phase, the 110 line ground and the local ground. Who is connected to the motor red wire,yellow wire, green and black You ...
Start Capacitor wiring diagram needed I have an old AO Smith water pump, model:C48L2DA5A1, motor: SKCET52ABN that the capacitor blew out in. When I took the cover off the yellow wire coming from the ...
how do i fix the melted wire mass From the back of the alternator there are two wires: orange/blue and black. the orange/blue wire directly connects to a silver box labeled "Motor Craft Electronic ...
how to wire a delavan powerflo series rv water pump I need to see the wiring for the pump. I purchased a used rv with this pump in it, but one wire is loose. There are two wires at the end of the pump
how do I wire controller box wire submersible pump? How do I wire controller box for 3 wire submersible well pump? How do I test the pump directly? Is it 110VAc or 220Vac?
23 questions posted
Usually answered in minutes!
136 Questions
113 Questions
61 Questions