...set up you can find the jumper location next to the power on a hard drive and the settings for plastic jumper location is usually printed on the top of a hard drive IDE-0 means Pri master IDE-1 means ...
set the jumper so that it only has 1 pin under it, and doesnt actually jump any pins, or just take the jumper out. only use the "slave" setting if the "master" device on the same ide cable is actually
Question about Maxtor Computers & Internet
...set the jumper to the master position. if this drive is for additional storage, please set the jumper to slave. and make sure 1st hard drive is set to master. if this is the only drive in the system, ...
Question about Maxtor Computers & Internet
...set up you can find the jumper location next to the power on a hard drive and the settings for plastic jumper location is usually printed on the top of a hard drive IDE-0 means Pri master IDE-1 means ...
...DS = Master SP = Spare (Slave) Jumper settings, If you use one id cable with tow devices at that time you should hard disk jumper master & second device slave mode of jumper. hard disk ...
just one jumper if no jumper on maxtors becomes slave. jumper on 50 is master. if u use cable select.. on same ide another device must also be cable select. if one is master other is slave on same ide
Question about Maxtor Computers & Internet
...set up you can find the jumper location next to the power on a hard drive and the settings for plastic jumper location is usually printed on the top of a hard drive IDE-0 means Pri master IDE-1 means ...
...hi frined remove your hard disk jumper & u r hard will be slave PLACETHE JUMPER IN THE MASTER AT FIRST POSITION AND REMOVE ALL JUMPERS FROM YOUR SLAVE DRIVE IT WILL BE DETECTED AS SLAVE...
Question about Seagate Computers & Internet
...set the jumper to master, if you want it as a secondary drive then set it to slave. Alternatively, you could use a separate IDE cable on the motherboard's secondary IDE interface.When you reboot your ...
...master jumper setting you can find the jumper location next to the power on a hard drive and the settings for plastic jumper location is usually printed on the top of a hard driveIDE-0 means Pri ...
805 questions posted
Usually answered in minutes!
421 Questions
140 Questions