...DS = Master SP = Spare (Slave) Jumper settings, If you use one id cable with tow devices at that time you should hard disk jumper master & second device slave mode of jumper. hard disk ...
Question about Maxtor Computers & Internet
...jumper to the master position. if this drive is for additional storage, please set the jumper to slave. and make sure 1st hard drive is set to master. if this is the only drive in the system, please ...
Question about Maxtor Computers & Internet
Master slave jumper settings on 250gb Maxline Plus II SATA I have two Maxtor Maxline Plus II 250gb SATA HDD drives that I wish to use together in a system, neither of them is marked with jumper ...
...master and which is slave OR you can jumper both drives to the 'cable-select' position and the cable then determines which one is master and which one is slave. Usually the master is the one at the ...
Question about Seagate Computers & Internet
...jumper to master, if you want it as a secondary drive then set it to slave. Alternatively, you could use a separate IDE cable on the motherboard's secondary IDE interface.When you reboot your machine ...
just one jumper if no jumper on maxtors becomes slave. jumper on 50 is master. if u use cable select.. on same ide another device must also be cable select. if one is master other is slave on same ide
...master you can find the jumper location next to the power on a hard drive and the settings for plastic jumper location is usually printed on the top of a hard driveIDE-0 means Pri master IDE-1 ...
Question about Seagate Computers & Internet
Master jumper position for Conner,CFS541R hard drive. Have this old HD I'm trying to use but don't know where to put jumper. Master ? will be only hard drive. Thanks, Ron Isn't that shown on the hard ...
jumper settings for master drive if its a SATA hard driveyou dont need to set master slave the biggest capacity hard drive will set as master During the boot process you will see on the screen to ...
...master jumper setting you can find the jumper location next to the power on a hard drive and the settings for plastic jumper location is usually printed on the top of a hard driveIDE-0 means Pri ...
805 questions posted
Usually answered in minutes!
421 Questions
140 Questions