cannot get syncrowave to weld aluminum I have no remote must use remote output for tig I need to understand the set up Miller Tig welding Machine SYNCROWAVE 250 DX Guid Video And Solve probems Fine is
TIG 250/250 Tig 250/250 I tried to used the tig but it seems like there's no gas, chcek all the lines but there's no leaks. Machine was set at DC-, and Med Doing Mild Steel welding Any help would be ...
tig my pudle melts into gray not shinny Ensure you have the correct angle when using the torch = 22-24 degrees from vert: this will provide good gas coverage. setting should be 15 - 20 ltrs using a ...
Question about Miller Welding Tools
...Tig welding and unit displays HELP 12 code. Tried resetting to factory settings but continues to display HELP 12 code. Some welders have a resistor that is obvious and accessible but to give an error ...
Tig welder wont strike up arc, power to welder ok, high frequency seems ok.. on AC the arc keeps spitting.. set on DC nothing at all ?? made the mistake the other day of powering it off a generator ? ...
...settings on your tig welder. The three main ones are AC, DCEP and DCEN. Choose AC for aluminum. Slide the "cleaning/penetrating" slider more to the penetrating side. Set the "air on" to five seconds ...
...tig weld aluminum. I can not seem to get the settings right to melt the aluminum. It just leaves a bif spot on the aluminum plate.The plate is about 1/4" thick and im using the red thonsten. ...
what is the best settings for alum. to weald alluminum you have to have argon gas head and gas. The setting depends on the thickness of the alluminum.
syncrowave 250 dx aluminum set up syncrowave 250 dx i need to no the set up for aluminum on this machine You can go to millerwelds.com and download the manual for this machine..it should help you I ...
linde welding machine when welding in tig mode foot pedal will not control amphere output it goes from 0- 100 no in between Check to see if the remote switch has been set, or if you have broken wire ...
28 questions posted
Usually answered in minutes!
70 Questions
35 Questions
28 Questions