...test also the control board. Replace the magnetron if the checks and all of the high voltage component tests are good, but the unit still does not heat. All locations, and description of this parts ...
...Heat Display shows F-9 LG Microwave Oven/ Household Model LMVM 19455 SB Mfg. 2003 Test the high voltage capacitor,the rectifier diode.or the magnetron. If it additionally does not spin and no light, ...
...and I set the clock. Now everything turns on fine, power, fan, display but won't heat the food. Is it magnetron or diode or power supply? cant give an answer since would need to test those ...
...test also the control board. Replace the magnetron if the checks and all of the high voltage component tests are good, but the unit still does not heat. All locations, and description of this parts ...
...heat. If it works properly and doesn't shut off then it means that the there is less venting. Please reinstall it with proper designing. If still the issue persists, then check all of these to narrow ...
...heat anything. The display operates correctly, the function buttons operate, and the turntable rotates. there are 2 fuses inmicrowave 1 for ac input 1 for high voltage transformer that will trigger ...
...test ok new magnatron all fuses ok all connections ok when you attempt to heat anything, microwave runs for just a few seconds, then stops and displays the F7 code. When I do the board test I get an ...
Not heating. I have tested with water for two minutes it stays cold. I have checked the circuitbreaker, fuses and closed the door little harder. Still no heating. I did get a F7 code on the display ...
heat. Test the diode and replace it if necessary. High voltage capacitorResponsible for storing electricity, this part is a key component in any microwave. Remove, discharge, and test the capacitor to
29 questions posted
Usually answered in minutes!
106 Questions
68 Questions
72 Questions
52 Questions
48 Questions
