...errorError Point 209: Cupper HP switch is OFF when master-making starts or when the master material is set in the master making unit.Try this: Take out master and then close master making unit ...
...RED LIGHT FLASHING Error type D08: Master making unit not setError point 224: Master making unit is not set (both the safety and lock sensor are OFF)Try this: Set the master making unit in
...Master making unit not set Error point 227: Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds). Hint: Check mentioned sensor. In ...
...master making unit inside of riso. (sometimes not straightenable and must be replaced) 4. (rarely) antenna is loose either inside of drum or from antenna pcb in lower right corner, behind front cover ...
my riso is showing A-17 & -209 A17-209 means: Cutter HP switch is OFF when master-making starts or when master material is set in the master making unit.
Question about Riso Office Equipment & Supplies
...making a new master. Code A-04-303 I have removed the discarded master, but I can't open the drum cylinder, or the master cylinder. Under the drum and master unit is there a round openning .Take a ...
Question about Riso Office Equipment & Supplies
...unit.To correct this open the front panel of the master making unit and check that all the drive bands is in place.I am working 10 years with Riso and this machines is the best I ever worked
error code d-17 in rizo rz 200ep my rizo machine is displaying error code d-17 and -237 what does it mean remove master from the drum and reset the master in the master making unit
Question about Riso Office Equipment & Supplies
...EZ 200E model gives error message A-34 -218 but all seems fine at master roll installation. What can we try ? It means to reset the master material in the master making unit. Should be ok after
...unit which is responsible for put the master on to the drum. Please check the unit for any phycial damage. You can also remove the old master on the drum your self and place back the drum into the ...
487 questions posted
Usually answered in minutes!
37 Questions
5 Questions
4 Questions
100 Questions