Riso RZ220 Duplicator "master making" Questions

...master making mode. I cannot reset the machine. Remove the master that is on the drum. Then check the master roll remove it cut about 18 inches off then re install master roll. hit the reset, then ...

Lanier error code 00 Switched two drums..same wrench error code when trying to make a master That is the master clamper area. Take off the rear cover. From the rear it is on the right. There is a ...

...making a new master. Code A-04-303 I have removed the discarded master, but I can't open the drum cylinder, or the master cylinder. Under the drum and master unit is there a round openning .Take a ...

my riso is showing A-17 & -209 A17-209 means: Cutter HP switch is OFF when master-making starts or when master material is set in the master making unit.

...master making process shuts down because it indicates that it has not removed the master from the print drum. IT HAS REMOVED THE MASTER. It does not help to reset the machine. It does not help to ...

...master making unit inside of riso. (sometimes not straightenable and must be replaced) 4. (rarely) antenna is loose either inside of drum or from antenna pcb in lower right corner, behind front cover ...

how do i remove jammed master in disposal unit in a riso gr3770? On the back there is a box where the masters are used, remove and check for any play between the master and the shipping box. Open ...

Image on master is cut off Place the original on the glass, the make master. The image on the master is cut off compared to the original. Have tried several different directions and sizes of paper. I ...

...RED LIGHT FLASHING Error type D08: Master making unit not setError point 224: Master making unit is not set (both the safety and lock sensor are OFF)Try this: Set the master making unit in

...errorError Point 209: Cupper HP switch is OFF when master-making starts or when the master material is set in the master making unit.Try this: Take out master and then close master making unit ...