Riso RZ220 Duplicator "clean drum ink overflow" Questions

...Overflow ink in the Squeegee unit. Remove excess ink from the Drum. You must clean the cylinder, clean the ink (sensor ) and remove the excess ink on one side and / or along the sides of the

...drum and clean out the excess ink but I don;t recomend that. If you don;t use Riso brand ink you will have this same problem again. It cost more but it is worth the cost to prevent this problem. Do ...

...drum (be very careful!) you can see the ink buildup. You need to clean all the extra ink off. Be careful you don't touch the sensors -- two little rods about as thick as a pin that hang over the ink ...

...clean drum need to download a service manual for your model thenyou can be walked through from there. hope to be of help. Remove screen and clean all four surface with isopryl alcohol as well as drum ...

...drum body. Inside, you will see these two antennas in the ink bead. Clean out most of the ink and make sure the small antenna has no ink on it. Reassemble. risoguy hit it right on the head - but - if ...

clean out ink section of drum. Remove the ink then press reset button. Then turn off and on and re-insert ink. I find the machine type riso rn 2050, there is the problem of cod t4-513 I tried to solve

...SVP? merci d'avance!    HI.  E4 REFERS TO "INK OVERFLOW" .  CHECK INSIDE THE DRUM, AND CLEAN IF NECESSARY.   IF YOU NEED MORE INFO, LET ME KNOW 

...clean it and the print head shaft thoroughly. That is the most common problem. The next problem is the print head wiper blade being stuck to the print head. That is caused mostly by power failures or ...

...drum taken apart and cleaned out. any step by step instructions? There is a much easier way to solve this problem. get a reem of paper and put it in the machine.next turn the power off hold down the ...