Question about Kyocera FS Office Equipment & Supplies
DOTS LINES IT WAS SHOWING A CODE ERROR C7980 BUT I HAVE CLEANED THE WASTE TONER BOTTLE AND THE CODE IS GONE NOW ITS ONLY PRINTING DOT LINES Check if you have put the little pwb inproperly or, in worst
Question about Riso Office Equipment & Supplies
...little black dots on page Hi there, When I print with my black drum the paper comes out with lots of extra little black dots/splotches. They are hard to notice as they are reasonably tiny, but ...
...little dots all over the paper, What do I do to fix this problem? The description is a little vague Little dots where? Front or back of the paper? And what are you printing- the type of document Text ...
Question about Kyocera FS Office Equipment & Supplies
...little black dots on my documents If the dots are all over the paper you may need to replace your toner cartridge. If the dots are smearing, you may need to check your fuser assembly (have it checked ...
...little strips (like a 1/4inch) of CMYK dots (one of each color) at the top of each printed paper and in the middle. Haven't been able to get them to stop printing despite multiple prints and wiping ...
...LITTLE TRIANGLE OF GREEN DOTS ON THE TOP - WHAT DOES THIS MEAN. IT IS NOT PRINTING & I AM TRYING TO FIX IT. PPPLEASE HELP! THANK YOU! That means it needs toner. that LITTLE TRIANGLE OF GREEN DOTS ...
...dots appear at the same place on a line (i.e. same character spacing from left margin) regularly about every 10th line though NOT dependent on the text character size. Thanks for any help / ...
...paper when I print and copy. I have taken out the drum and shook a little...what else can I do to get rid of the dots? Thanks! look at the drum, that's going to be where you will find the dots
Question about Kyocera FS Office Equipment & Supplies
...dots on special paper to form the characters. There may be little to nothing you can do to make output better. You can try unplugging the unit from the power source and using a cotton swab dipped in ...
Question about Kyocera FS Office Equipment & Supplies
...we print anything little black dots show up about 34mm apart on the right hand side. How do we fix this problem. Have you tried a new Imaging drum? have the same problem cant figure out the ...
166 questions posted
Usually answered in minutes!
192 Questions
143 Questions
97 Questions
55 Questions
66 Questions