Samsung HLR5064W DLP Projection TV "runs 2 minutes" Questions

...runs for normal 2 to 4 minutes. wassuuuup? Hi, It probably has a fault.But try this.Disconnect all speakers and inputs and try again.If that works reconnect the speakers A PAIR AT a Time.That should ...

...minutes. I unplugged a new Wii game that was installed about 7 hrs before the problem started. After this the TV ran for another 2 hrs w/o any problem. This morning the problem returned. I unplugged ...

...2 weeks ago. A technition replaced color wheel and set still shuts off and lights are blinking. Cooling fan or something else? It runs a few minutes and then shuts off sounds like the lamp is going ...

...2 minutes, then scrambled. I unplugged as couldn't power off normally. Plugged back in after a minute or so. Picture came up ~30 secs later and stayed on for a minute then the TV shut itself off. 30 ...

...it keeps running for another 1-2 minutes (cooldown) then its a fan. Both are changeable by a technical person, the colorwheel being much more intensive disassembly. Let me know if you need help

2 minutes, the picture is good for another 15-20 minutes.Occasionally, when I turn the tv on, it has white stripes running verticle on the screen. This has only happened 5-6 times since purchased new.

...MINUTES EVENTUALY WILL RUN A LITTLE LONGER BUT STILL SHUTS DOWN ...WHY ??? EXSPEACIALY NOW PLAYOFFS BULL....p.s. the fan is working Is the unit free of dust and debris from dust? If its overheating ...

...minutes the three lights start to blink and it tunrs off. It can take up to 2 hours for this to happen but it is happening more and more frequently and faster. It's not the bulb because my menu comes ...

...2-3 minutes. I turn on again same thing? Jansen when all three lights are blinking its indicating that the lamp may be defective. Samsung recommends that the lamp and large lamp fan and thermistor be ...

minutes there after Hi if your tv is a DLP or LCD and you hear clicking or like wanting to turn on ,most likely its an issue with the ballast which is the board that powers the lamp.(Discard if tv is