Philips Magnavox 50ML8105D 50" HDTV DLP TV "stop remote controlling tvs" Questions

Power. If it does not power off the tV after pressing the tV button, the remote may need to be reprogrammed to the tv. Cable companies usually have the codes needed to program their remotes to the TVs

stop this from happening? The closed captioning is on. If the source is OTA, you can turn it off with the remote (a button marked CC, press it until it reads CC OFF) or the On-screen Display (probably

...remote or tv is pressed, the LED lights up as normal but no function is completed. It wont change channel, you can't get the menu up and you can't turn it off - although it is black, you can see the ...

...stop. It is worse if tv is warm. Sometimes it won't start clicking until it has been on for a while and the clicking just gets louder and louder until I turn off the tv. The tv works normal all the ...

...remote itself or the TV chose that time to stop working. The easiest way to identify if this is the case is to have Direct TV exchange your remote for you. If you are able to program in the code that ...

...TVs are receiving it.) You may have inadvertently pressed some buttons on the remote to take it out of the mode to receive cable channels. If you unplug the tv from the wall for a while, it may clear ...

...remote control or any bottom. It might be the memori card? where or how I can fix it? Thanks Your set uses the 195 series chassis, which has separate components for each of the 6 convergence channels ...

...remote control combination code to get into convergence adjustment mode. Be careful to keep the convergence dot spacing uniform across the screen or your picture will be misshapen, work in small ...

...remote for all tvs in which you have to put a code in. The remote worked well but sudenly stopped working. I changed the batteries but still nothing. Then i bought an original remote still i couldnt ...

...remote and the TV... clean them with a small rag or paper towel (Do Not USE Abrasives to clean any part of your Electronics) >Check the plug for any defects >Reset your tv back to it,s factory ...