Toshiba 56HMX195 52" HDTV DLP Projection TV "cooling fan 62hm95" Questions

...of a clock. Hello Miggs, This sounds like a color wheel or cooling fan issue. I would take the set back and have them check the color wheel and fan assemblies. I hope this helps Thank you, ...

cooling fan on 52HM85 model. From where do I get the fan, and how much it cost? Its not the fan, its the color wheel assembly. Unfortunately, its not available from Toshiba. Check with PTS in Indiana.

When TV on we hear aloud noise and it will continue for several minutes after the TV is turned off. Any help, thanks sounds like a fan issue which continues to run to cool down the set after you turn ...

...cooling fan or color wheel? Can these be changed independently of each other and can I do it myself? The buzzing is most likely the fan. A low volume intermittent screeching (like when a small motor ...

62 in after it get hot it turns off. Whats the problem Check all fans are clear and working. If all cooling is working and clear and free from dust clogs then it may be a faulty lamp.Unfortunately the

...cooling fan.thank youTom Yes,it sounds like the color wheel motor is going,and yes it satais on untill lamp cools down Return it if possible. If its under warranty service it. Mine has been replaced ...

The fans on my Toshiba DLP frequently makes a loud humming noise, as if something is vibrating that should not be. I am not sure if it is the bulb fan, or the ballast fan, but the noise continues ...

...cooling correctly but you said the fan was fine. It could had just been an defective lamp, send the lamp back to where you bought it and tell them it was defective. There also should be return ...

...cooling fan.. The noise comes from the bulb that is being kept cool by the fan. The noise is more like a humming sound. When the projector is turned on after bout a min. or so this humming noise ...

...62HM95 DLR TV. I was advised by Toshiba that I needed to replace the lamp to correct my issue. However the replacement lamp worked for 1 evening and I am now back to my original issue. Here is the ...