Weiser Lock Powerbolt 1000 Lock "deadbolt open close" Questions

open with key. The deadbolt may very free inside the deadbolt hole... This system is low torque and a over torque clutch may slip if the dead bolt it's not completely free inside the deadbolt hole

deadbolt hole... Also, if you try to open the door before to unlock it, you may block the deadbolt... take care to unlock the door before open it. to be sure that the dead lock is ok, you can turn the

kwikset smartcode beeps twice and then long beep? It will not open or close Buy a Slage. I'm replacing my kwikset - I've had it with his junk

deadbolt at Rona (Rona Collection). Installed it and i can open/close it with the remote control or a key. Can't open it by entering a code. I thought the factory code was 1234, but that doesn't work.

...have recently installed this lockset, it is possible that the alignment is off and is causing the deadbolt to drag and is preventing free movement. You'll need to adjust the lockset to allow the ...

...deadbolt model 898 keyless entry.i need to change pin number on keypad outside I had the same question as my son installed the lock. Instructions should be printed on the cover you remove (inside the ...

deadbolt I installed the lock and everything it worked fine for about a week. Now, when I enter the code I hear a whimper from the lock like the cam is trying to engage but I spin the knob and nothing

deadbolt barely moves in weiser lock I assume that you get the same results whether you operate the lock with the door open or the door closed. That is, that you've already ruled out a bind ...

...open. The first time moves the deadbolt about 1/4 inch and the 2nd time actually opens it. I've changed batteries and it hasn't corrected the problem. You did not indicate whether the problem ...

Somehow the lock thinks that when the door is locked it is open, and when it is open, it thinks that it is closed. Did I somehow put the lock on in some reverse order? Or can I somehow program the ...