red arc comes on when gun signal starts checked cinsumables many times put on new parts, hypertherm 1650 plasma brand new have you tried to tighten the end where the arc comes out thats what i do and ...
on my dc inverter welder 3 in 1 unit the plasma and the tig stoped workimg but the stick welding part will still work. I did find a 221k / 2vk cap bad, but it still has not fixed the unit. Bad ...
the exclamation point, the red dot, keeps popping up and it is also red on 85-5.9 and only air is blowing out Try and replace the swirl ring. We had the same problem and it fixed it. They cost around ...
...relay on your circuit board. They arc and spot weld themselves at times (nothing a sharp hit can't fix) Replace the relay with a higher quality one if you
...but has sound, I have taken it apart to look at the fuses and now I'm stumped. I'm looking to fix this myself i just want to know if and which board I need to replace. thank you this thread is ...
...up for 1ph 230 and got plugged into 460 and fire shot out of it several times.what would it take to fix it? I'm not recommending that you do this, but if you were to open the covers you'd be ...
as is described on other posts. Any help to the problem is great, thanks. Same problem here did you fix it
unit,if there is a nic or cut in that lead (main power lead)the unit will not fire,sadly you cannot fix the lead ,it has to be replace with new one, Check the tip. If you can push it in. Then power on
...coming on and machine wont work check your torch and make sure nothing is loose. If that does not fix it you will need to disassemble the tip and make sure there is not any debris if there is clean ...
17 questions posted
Usually answered in minutes!
70 Questions
35 Questions
28 Questions
