drive pin does not retract DA250A- drives a nail okay, but drive pin does not retract. Easy to fix. Remove the head and pull out the cylinder. Look for black band around lower part of cylinder. This ...
Question about Senco Air Tools & Compressors
porter cable 15ga finish gun pin doesnt retract after firing After firing the pin doenst retract, i took it apart and cleaned it and lubed it but still doesnt retract after firing. does anyone know ...
craftsman framing nail gun pin wont retract most likely the pin has a small curve in it causeing it to stay out just replace the pin and never oil the external parts this causes dirt to build up on ...
Question about Air Tools & Compressors
I have a porter cable rn 175a, barely used, driver will push 1 nail, and then has to be manually reset, any suggestions or solutions please gun will shoot one nail fine, but then the pin will not ...
Question about Porter Cable Air Tools & Compressors
Driver pin on model FN250A not retracting far enough to drive next nail. Will shoot 2 or 3 nails and miss 6 or so. I had the same problem with an electric stapler from Craftsman after years of disuse.
I have an fc350a nail gun. After firing one time, the piston will not retract until the air hose is removed from the gun. May need a new firing valve or safety foot is sticking. Easy to check, Remove ...
Framers 702xp won't drive a nail more than an inch into wood and sometimes won't retract the pin all the way. Before you use the tool put a few drops of oil into the air line input. The pin ...
pin does not retract after firing. easy fix. unplug the air or electric first. Then disassemble the nose, usually requires an allen wrench. Remove any built up dirt or other debris and put a drop of ...
Question about Stanley Air Tools & Compressors
air leaks around green cylinder at trigger area and nail plunger will not retract. this is a stanley bostich rn45b nailer Your nailer uses a trigger valve (part # tva6 cost about $20) and is sold at ...
The pin that fires the nail sticks and won't retract after firing. You can push it back in after it fires, but that is very time consuming. tried cleaning and oiling to no avail. please go to ...
16 questions posted
Usually answered in minutes!
9 Questions
7 Questions
3 Questions