Senco SHF50 2" Hardwood Flooring Nailer 710001N "cleat" Questions

I have a central pheumatic stapler model 99640. When I used it, it shot out 2 'L' shape cleat (16G, 2") at the same time instead of 1 cleat. I tried to minimize the gap for the mouth, it end up jamed.

My MFN-201 cleat driver will not drive the cleats deep enough into the 3/4 inch prefinished bruce flooring. It postitions the cleats fine. It is on the Rachet setting. There is a piece of rubber under

Nail cleats are not exiting when the mallet hits on my Bostitch MFN-201. The spring mechanism appears quite loose; you can push it down or in very easily by hand. That is most likely what needs to be ...

SENCO SHF 50 floor nailer won't consistently sink cleats I have a SENCO SHF 50 floor nailer that is operating erratically. When operating at 90-110psi, it will sink 2-6 cleats and then leave the next ...

...a look at the link below for a parts list showing the sizes available. For a quick fix to drive the cleat deeper, use a thinner bumper below the head of where you strike the nailer. If you manually ...

...halves. On the bottom of the gun, directly below the nail strips, there is a long greyish coloured cleat. This will slide backwards and allows the gun halves to seperate. ake care noticing where the ...

...Driver advances and stays down under pressure even after air line is un coupled. Will not drive cleat. The air motor needs to be rebuilt. You can try a couple of drops of air tool lube in the air ...

my gr200lcn floor nailer keeps getting nail stuck in it on the first nail filred when you take it apart to remove the nail it looks like the driver only hit part of the nail head Depending on amout of