...3/8, 16X1.25 24 Rod Belt Guide 25 Belt Cross Drive Ja 26 Belt Primary 46" J 34 Bracket Cover 35 Bracket, Pulley Cover 36 Qx Lburg# 094605E700 -INACTIVE- 37 Use Lburg# 093349 Zi -INACTIVE- 38 5/16, 18 ...
...3/8" square opening in the lower idler arm assembly and push the idler arm counterclockwise. While holding the idler arm back, loosen the blade drive belt from the pulley and slide the belt away from ...
...belt and 1406 mm in circumference. or 3/8 41 will be 3/8 across the top and 41" long The bearings inside are probably shot. here is what mine looks like. I've read on other sites its best to replace ...
...to come to a complete stop before reducing the engine RPM OR 2. adjust the belt tension by loosening the bolt where the cable to engage the blades is attached to the maximum. OR 3. replace the
...3 things: 1. Drive belt off pulleys (recommend replace belt if so) 2. Belt broken (obviously, replace) 3. Hydrostatic transmission failed (least likely, but this is an expensive repair shop issue if ...
...3. Pull the belt away to reinstall a new one 1. Work the new belt around both the mandrel pulleys 2. Make sure the belt is in all the pulley grooves and inside all the belt guides 3. Now you have to ...
...There are 3 models of the LA145. Hopefully this is the correct diagram. The deck belt routing appears to be the same on all 3 models. Thanks for choosing FixYa, Kelly Belt Path for the LA 145, 48" ...
...and drive pulleys. Check the drive and pulley wheels. ... Step 3 - Select correct replacement belt. ... Step 4 - Install V-belt. ... Step 5 - Correctly tension new belt. ... Step 6 - Start the
...belt guide. 3. Remove the belt guide with a socket wrench. 4. Push down on the belt tensioner pulley with your hand. Remove the old belt and set it aside. 5. Install the new belt and release the belt ...
308 questions posted
Usually answered in minutes!
1,998 Questions
1,006 Questions
710 Questions
725 Questions
285 Questions
