Craftsman 42 in. Precision Cut Plus 24hp Lawn Tractor "riding lawn mower start stay" Questions

...does my mower start u then die. It will not stay running. if it does run it is only for a few minutes mower starts up then dies. Will not stay running. Any ieas? Take your fuel cap off, then try

...lawn tractor or zero-turn mower turns on the mower deck. Instead of a lever that you pull to start the blades, you pull a red knob. The advantage of an electric clutch is the belts stay tensioned all ...

...riding lawn mower, whenever I engage the mower the engine dies, otherwise it runs .... My dr feild brush mower ... cuts off when I engage theblades. ... My Huskee only shut off once I put it in drive ...

...Riding Lawn Mower, 17.5 hp, about five years old. The problem is that it will not stay on, as soon as I let go of the break, it will cut off, the same goes it I try to lower the deck. It starts right ...

...lawn tractor will not start unless I jump the solenoid with a screw driver ? Then it will stay running ... Why does my 42 in. lawn tractor only run by jumping the starter solenoid ? Sounds like the ...

...Mower will not start and going through check list, says fuse could be blown. Also to start need parking brake engaged but it will not stay, why? Most the fuse is for starting. The park brake probably ...

lawn mower stays running on jumper cables but once disconnected it shuts down when choke is engaged if it is already running and you "engage" the choke, you will flood the engine with too much gas and

Riding mower turns on when the choke is pulled but turns of when the choke is pushed back in. Sometimes it stays on but after a few minutes sounds like it is running out of gas and eventually turns ...

...lawn mower does not run I think it is the carbarator model no HOV 130 - 206810c (starting spray does start but shuts off in less then a min. Could be the choke staying open or closed and choking out ...

...lawn tractor. The engine starts, the mower deck will engage but the accelerator pedal just stays on the floor. Can you help me trouble shoot this problem? check your belt might be off a pully or maby ...