Craftsman 42 in. Precision Cut Plus 24hp Lawn Tractor "lawn mower blade hits ground" Questions

...lawn mower and I had to replace the blades - which I did but when I went to mow the lawn it dug up my lawn so I thought I put the blades in wrong so I reversed the blades and it is doing the same ...

...blade keeps hitting ground Is the deck too low or one side lower than the other? Level the deck side to side, front should be a little lower than back (about 1/4 inch). check tires for correct air ...

mower blade should be level or a maximum of 1/4 inch lower in the front.This adjustment is done with the adjuster bolt that runs from the front of the mower to the frame under the muffler, it may have

lawn as a result. The mower-cleaning tool scrapes this debris off and restores the deck to proper function. Measure the height of the mower deck with a ruler when the mower is on flat ground. The deck

ground and the blades stoped but the mower kept running, she backed the mower to the shed about 50 yard away and turned it off, now it wont start, it doesnt even have power, it doesnt do anything when

...mower on level ground. Concrete or pavement. Check to make sure deck is setting level. If not, adjust deck. NEXT. Make sure mandrel or shaft isn't bent or broken. (this is what you bolt your blades ...

...blade bearing housings and mower stalls after five minutes or so.I did replace the blades... I have a feeling that the bearings were damaged when they hit. The new blades are ok, but the bearings are ...

...Please. May the All Mighty Bless You and Yours. Be Safe and Be Happy. Thanks. Good Luck Respectfully jbridger (John) is there a way to titen the blade belt ona 15hp ohv gold 6 speed 42" ridy lawn ...

mower is on the lawn, place a piece of plywood under the jack stands to avoid sinking the jack stands into the lawn. 3 Pop the axle cover off of the center of the wheel. You can pry the cover off with

...lawn tractor has been sitting in a storage building for several years. I am now trying to get it going. It trys to start some of the time but won't start. The cylenoid kicks in but there are sparks ...