Craftsman 42 in. Deck 19.5hp Lawn Tractor "rod drive belt adjustment" Questions

Ad

...drive belt) is adjusted by spring pressure pulling a long rod that has serations on it. Either the belt has run out of adjustment (= new belt needed) or the adjuster has stuck. Lift up the seat and ...

Ad

...drive belt around the left side mandrel pulley and under the rear mowing deck cross link rod between the right and left side mandrel pulley. Slide the mowing deck under the right side lawn tractor ...

Ad

Question about Craftsman Garden

1 Answer

...rod. 2) the amount of tension on the spring that holds the engage idler against the belt. That can be changed by moving the bracket that anchors the spring. I've had my unit for several years now and ...

...drive power can tran oil be checked. The tractor has 170hrs operating time.How can you tell if its the belt or the trans. thanx Rod. I would thing its the belt I have same mower u can check rear end ...

...drive belt.(replace the belt). by-pass lever (rod) not fully engaged (push it all the way in) travel pedal or linkage is faulty or out of adjustment ( take to dealer) Transaxle is faulty (take to ...

...rod off, and it was perfectly straight. I don't see anything bent anywhere. I can say that the steering wheel is no longer centered when the wheels are pointed straight ahead, like it used to be. ...

Question about Swisher Garden

1 Answer

...drive belt. turn each blade by hand. Sounds as if you have bearing problems. Each spindle has an upper and lower bearing of the same size. They are notorious for going out! You can get them at most ...

How do I adjust the belt on my Ariens 11528 snow thrower on the secondary drive, t will not throw snow by the handle under the handel little ajustable rod

...rod above the axle in the rear of the tractor. Otherwise it could be that the drive belt is too tight but this would probably lead to a burning smell and not being able to shift in and out of neutral ...

...drive belt is slipping alright.  Need to tighten your clutch rod.  One end of rod adjust.  Have someone help you, move the clutch petal and your helper watch and see rod

Not finding what you are looking for?
Craftsman 42 in. Deck 19.5hp Lawn Tractor Logo

1,292 questions posted

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

john h

Level 3 Expert

29494 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...